ANNUNCI ATTIVI

25
Giugno

Annunci attivi

Position in Industry | Senior Electronics Engineer In evidenza

25 Giugno 2025

📍Location: Genoa, Italy

The Rehab Technologies Lab at the Italian Institute of Technology (IIT) is looking for a Senior Electronics Engineer with expertise in embedded systems design for robotics (e.g., actuator boards, sensors, communication systems, etc.), to contribute to the development of cutting-edge medical devices for rehabilitation.

Spoiler:

This may be your next role if:

  • You're passionate about using technology to solve real-world problems and improve people’s lives
  • You have solid skills and experience in electronics system development and PCB design
  • You’re looking for an opportunity to work on advanced technologies in a highly specialized, multidisciplinary environment

This is probably not the right fit if:

  • You’re uncomfortable working with people from different technical backgrounds
  • You need highly detailed instructions for every task, rather than figuring out the best way to get things done
  • You don’t meet the technical requirements listed in the job description
Interested in applying? Please fill out the application form
    
 
 
Who you will be joining

The selected candidate will work within the Italian Institute of Technology (IIT), an institution founded to promote technological development in Italy and provide advanced technological education, thereby supporting the growth of the national production system. The Institute has always been committed to addressing society’s most urgent challenges through science and technology, research, and innovation — while keeping the human being at the core of its mission. The headquarters is located in Genoa and is part of a network of 11 centers across Italy and two locations in the United States. This extensive network fosters continuous exchange of knowledge, skills, and culture, which is essential to drive ethical and sustainable innovation.

___________________
Which team you will be part of
The selected candidate will join the Rehab Technologies Lab at the Italian Institute of Technology, established in 2013 through a collaboration between IIT and INAIL. The lab’s mission is to develop robotic technologies for the rehabilitation of people with motor disabilities caused by spinal cord injuries or orthopedic and neurological disorders affecting the upper limbs. In this laboratory, robotics integrates with neuroscience, rehabilitative medicine, and interaction design to create devices that can communicate with the human body and adapt to the specific needs of patients. Projects always originate from real clinical needs and are developed in collaboration with a network of national and international partners, both in the medical and institutional fields. Led by Dr. Matteo Laffranchi, the team focuses on solutions that combine robotics, medicine, and human-centered design, adopting an approach based on digital health, bodily sensoriality (embodiment), and active engagement principles (gameability). For more details on the lab’s activities, research lines, and developed devices, visit: https://rehab.iit.it
_____________________
What your role will be and what you will do
The selected candidate will be involved in the electronic development of complex robotic systems, playing an active role in the design, testing, and optimization of hardware components that control actuators, sensors, communication, and power management. The role requires close collaboration with a multidisciplinary team of engineers and researchers to ensure the reliability, quality, and safety of the developed devices.
Key responsibilities include:
  • Design, optimization, and testing of electronic boards for actuator and sensor control, signal conditioning, communication, and power management

  • Management of prototype production and debugging and troubleshooting activities

  • Contribution to quality control and technical compliance activities, in synergy with the rest of the team

  • Preparation of detailed technical documentation related to board manufacturing, wiring, and system testing

  • Daily collaboration with mechanical, software, and control engineers to ensure proper integration of electronic components with the rest of the robotic system

  • Possible supervision and mentoring of junior profiles, according to the laboratory’s needs

__

Who we are looking for:
We are seeking a candidate with a solid background in electronic engineering and a strong aptitude for applied design.

The following technical skills are considered essential:

  • Degree in Electronic Engineering or related fields
  • 3–5 years of experience in electronic system development and PCB design
  • Excellent proficiency in design, simulation, testing, and debugging of electronic circuits
  • Practical knowledge of PCB development tools (preferably Altium Designer, OrCAD, or equivalents)
  • Good skills in power electronics, motor control, and embedded firmware
  • Hands-on abilities in electronics (soldering, wiring, prototype building)
  • Operational knowledge of the English language

The following experiences and skills are appreciated but not mandatory:

  • Previous experience in robotics or medical device development
  • Experience designing complex electromechanical systems
  • Interest or experience in managing quality and technical compliance aspects of electronic projects
  • Previous supervision of junior staff
  • Experience working in international and interdisciplinary teams
  • Ability to coordinate with laboratory and workshop technicians to organize testing and assembly phases

Finally, we are looking for a proactive, problem-solving individual who is eager to get hands-on with prototypes and contribute concretely to device development. Strong interpersonal and communication skills are important, as the role involves close collaboration with professionals speaking different technical languages — mechanical engineers, software developers, clinicians — in a multidisciplinary environment where effective teamwork is essential for project success.

What we offer

The position is funded by INAIL (National Institute for Insurance against Workplace Injuries) and provides a fixed-term contract lasting until December 31, 2026. The gross annual salary is €38,000, with an additional 20% bonus upon achievement of annual goals. The contract also includes:

• The possibility to subscribe to supplementary health insurance with a leading insurance company chosen by the Foundation
• The option to work remotely or agile working for up to 10 days per year

More than just salary
Joining the Rehab Technologies Lab team means working with cutting-edge technologies that combine robotics, neuroscience, medicine, and design to help people regain autonomy and improve their quality of life. It also means being part of a team where the most innovative solutions are tested, within a multidisciplinary environment rich in high-level technical expertise and driven by a strong collaborative culture.

This job offer is addressed to candidates of all genders, in compliance with Legislative Decree no. 198/2006 and subsequent amendments, as well as Legislative Decrees no. 215 and 216 of 2003 on equal treatment.

 


 

website ads copia

SCOPRI LE ALTRE CALL ATTIVE

Questo annuncio non è in linea con il tuo profilo ma vuoi conoscere le altre opportunitĂ  aperte in questo momento? 


Visualizza altri annunci

 

ARCHIVIO CALL CHIUSE

Posizione in Impresa | HR & People Manager (part-time)

📍Sede di lavoro: provincia di Monza Brianza

Per una PMI che opera nella consulenza tecnica si ricerca una figura con solida esperienza nell’ambito della gestione delle persone, in grado di contribuire attivamente alla crescita della struttura, collaborando a stretto contatto con la Direzione.

Spoiler:

Continua a leggere l’annuncio se:

  • Hai una mentalitĂ  flessibile e adatta al contesto PMI.
  • Hai ottime capacitĂ  organizzative e metodo rigoroso; ti sarĂ  chiesto di coordinare le attivitĂ , di monitorare il raggiungimento degli obiettivi, di agire in ottica proattiva.
  • Hai un approccio maturo alle situazioni di gestione delle persone e sei in grado di confrontarti sia nei momenti positivi che in quelli piĂą delicati.

Non è l’annuncio per te se:

  • Desideri una realtĂ  molto strutturata e preferisci non “sporcarti le mani” con attivitĂ  operative.

Posizione in Impresa | Model-Based Design Engineer

📍Sede di lavoro: Agrate Brianza (MB)

Per ValueBioTech, PMI innovativa impegnata nello sviluppo di un robot chirurgico, stiamo cercando una figura esperta in Model-Based Design (MATLAB/Simulink). Preferibile figura con una formazione in ingegneria elettronica. La persona selezionata contribuirĂ  all'implementazione e alla validazione del software di controllo del sistema.

Spoiler:

Continua a leggere l’annuncio se:

  • Utilizzi MATLAB e Simulink come strumenti quotidiani di lavoro, non solo per analisi ma per lo sviluppo e la validazione di logiche di controllo;
  • Hai esperienza nella produzione di software certificato, con conoscenza approfondita del ciclo di vita del software e delle metodologie di sviluppo normate. Competenze nella gestione del codice sorgente tramite strumenti come Git, e propensione a seguire un workflow strutturato per garantire qualitĂ  e tracciabilitĂ  del software.
  • Sei interessato/a ad interfacciarti con motori, encoder e sensori fisici, collaborando strettamente con il team di ingegneria elettronica per garantire l’integrazione di questi componenti nei modelli di controllo sviluppati in MATLAB e Simulink.

Non è l’annuncio per te se:

  • Cerchi un ruolo software puro, senza interazione con l’elettronica o con sistemi fisici reali
  • Non ti riconosci in un approccio metodico e strutturato al lavoro tecnico;.
  • Preferisci lavorare in modo indipendente, magari in full smartworking, piuttosto che come membro attivo di un team di progettazione

Position in Industry | Electronic Engineer

📍Workplace: Genoa + Remote work

For the Rehab Technologies Lab at the Istituto Italiano di Tecnologia (IIT), we are seeking an Electronic Engineer with experience in the design and development of electronic systems for complex robotic devices, to contribute to the creation of innovative medical solutions in the field of rehabilitation.

Spoiler:

Keep reading if:

  • You are passionate about using technology to develop devices that truly improve people’s lives.
  • You have experience in designing and developing electronic systems and PCBs, and are excited to apply them to medical and robotic contexts.
  • ou enjoy working in multidisciplinary teams, alongside electronics, software, and biomedical experts.

This is not the role for you if:

  • You are looking for a permanent position.
  • You prefer a purely theoretical approach and do not enjoy hands-on work with prototypes, cabling, and lab activities.
  • You do not like working in teams, especially multidisciplinary and multicultural ones

Posizione in Impresa | Software Engineer – Control Systems for Rehabilitation Robotics (Prosthetics and Exoskeletons)

📍Sede di lavoro: Genova 

We are looking for a Software Engineer with experience in embedded systems development and control algorithms to join the Rehab Technologies Lab at the Italian Institute of Technology (IIT). The selected person will be involved in designing software solutions for robotic prostheses and exoskeletons used in rehabilitation.

Spoiler:

Continue reading if:

  • You are excited by the idea of developing software that enables robotic prostheses and exoskeletons to work safely and effectively, directly improving people’s lives.
  • You have experience in C/C++ programming and in embedded systems or control algorithms.
  • You enjoy working in multidisciplinary teams, collaborating across electronics, software and biomedical engineering

This is not for you if:

  • You are looking for a permanent contract.
  • You prefer purely theoretical work and are not interested in developing and testing code in real applications.
  • You do not enjoy team-based work, especially in multidisciplinary and multicultural environments.

Posizione in Impresa | Junior Proposal Engineer - Settore Oil and Gas

📍Sede di lavoro: Milano

Azienda del settore Oil & Gas con oltre trent’anni di esperienza nella progettazione, fornitura e avvio di impianti di trattamento, di riduzione e di misura, in una fase di forte crescita e potenziamento, ricerca due ingegneri da inserire e formare nel ruolo di Junior Proposal Engineer, con l’obiettivo di accompagnarli in un percorso di crescita fino a diventare progressivamente autonomi nella gestione delle offerte tecnico-economiche.

Spoiler:

Continua a leggere l’annuncio se:

  • Hai una reale passione per il mondo Oil & Gas
  • Sei un/a neolaureato/a con il desiderio di imparare un mestiere tecnico lavorando a fianco di persone esperte.
  • Hai una mente ordinata e analitica, con la naturale tendenza a ragionare in modo strategico

Non è l’annuncio per te se:

  • Non ti incuriosisce capire come la tecnica diventa progetto e offerta per il cliente.
  • Cerchi un ruolo commerciale puro, senza contenuti tecnici.
  • Non ami il lavoro di squadra o i contesti collaborativi e multidisciplinari